Photopolymer resins · Engineering resins
Basic printing, electronics, fire protection and tuneable elasticity
This group covers ready-made universal products and formulations that are agreed for the customer’s specific task.
A flame-retardant custom formulation
A custom photopolymer modification with a flame retardant. The base can be the selected resin, so the final properties depend on the agreed formulation.
GOST 28157, category PV-0 · self-extinguishing within 10 s
Applicationhousings and functional elements that require self-extinguishing.
Universal resin
A basic low-odour resin for high-precision models and prototypes in workshops and educational spaces.
λ 405 nm · Shore D 72 · strength 28.61 MPa · elongation 24.9 %
Applicationmock-ups, prototypes, decorative and teaching models.
Static charge dissipation
A functional resin for parts that can dissipate static charge and reduce the risk of its build-up near sensitive electronics.
Shore D 74 · strength 29 MPa · elongation 13.9 % · modulus 410.39 MPa
Applicationtooling, holders and housings in electronics and chip manufacturing.
Tuneable elastomer
An elastomer system for repeated deformation and dynamic loads. The ratio of components lets you change stiffness and adapt the material to the geometry of the part.
Applicationshock absorbers, robotics, sports products, lightweight lattice structures.
Resin for master models
A resin for master models for casting with platinum-cure silicones. The composition is designed so as not to inhibit silicone curing and not to leave a sticky surface.
Applicationmaster models for silicone moulds.
Advanced materials for additive manufacturing
Specify the process and printer, the function of the part, load, temperature and environment, your current material, the reason for replacing it, the acceptance criterion, volume and country of use.
Contact us
