Photopolymer resins · Engineering resins

Casting and high temperature

Burnout and heat-resistant photopolymer systems

Two grades cover different technological tasks: producing a clean burnout master model and making a rigid part that keeps its geometry under heat.

Burnout resin

AddiNova Castable

< 0.01 %ash content

A material for printing master models that are removed completely in the thermal cycle. The description states an ash content below 0.01 %, which lowers the risk of contaminating the mould.

Applicationjewellery and industrial casting, complex master models and fine-detail elements.

Key data

Colour: translucent yellow
Density: 1160 kg/m³
Dynamic viscosity: 110 mPa·s at 23 °C
Wavelength: 405 nm
Hardness: 72 Shore D
Tensile strength: 11.58 MPa
Elongation at break: 33.6 %

Heat-resistant resin

AddiNova HT

240 °Cheat resistance

A rigid resin for functional prototypes and parts that work under heat. Heat resistance of up to 240 °C is declared, depending on the final curing regime.

Applicationtooling, jigs, moulds, housings and engineering prototypes for use under heat.

Key data

Colour: translucent yellow
Density: 1139 kg/m³
Dynamic viscosity: 90 mPa·s at 23 °C
Wavelength: 405 nm
Hardness: 77 Shore D
Tensile strength: 32.25 MPa
Flexural modulus: 484.37 MPa

Advanced materials for additive manufacturing

Request a technical selection.

Specify the process and printer, the function of the part, load, temperature and environment, your current material, the reason for replacing it, the acceptance criterion, volume and country of use.

Fill in the request form